Products
Venturi Hopper is used for Drilling Mud Mixing Hopper
Basic Information
TRSLH series Jet Mud Mixer is special equipment to prepare and increase the drilling fluids weight by adding and mixing bentonite, change the fluid density, change the mud density, viscosity, and dehydration. The effect is more prominent matching with Shear Pump. Jet Mud Mixer is a unit used together with the solids control system for petroleum grilling and horizontal directional drilling. The unit includes one sand pump, one jet mixing hopper and one jet mixer that are installed in a base with pipe valves.At the same time, we can make Twin-Jet Mud Mixer according to the user requirements.
Mixing hopper is used to prepare or aggravate drilling fluid,change the density,viscosity,water loss of the drilling fluid. If put the drilling fluid materials and chemical addition agents into the mud tank directly,the materials and agents may precipitate or conglobate,with the decive,the materials and agents can be mixed well.
Advantages of Drilling Mud Mixing Hopper
- Hoppers can be Venturi hopper.
- Ideal design on sufficient working pressure make pumps higher performance.
- New style with better feasibility under different working condition.
- Meet drilling fluids weighting demand for 1500m ~ 9000m well drilling.
- Hopper and pump connected with pipelines. More flexible on hopper and pump quantities.
- Centrifugal pump is mechanical seal type. Reliable and durable.
- Easy to operate and maintain.
Specifications
|
Model |
TRSLH150-50 |
TRSLH150-40 |
TRSLH150-30 |
TRSLH100 |
|
Capacity |
240m3/h |
180m3/h |
120m3/h |
60m3/h |
|
Centrifugal Pump |
TRSB8X6-13J（55KW） |
TRSB6X5-12J（45KW） |
TRSB5X4-13J（37KW） |
TRSB5X4-13J（37KW） |
|
Working Pressure |
0.25~0.40Mpa |
0.25~0.40Mpa |
0.25~0.40Mpa |
0.25~0.40Mpa |
|
Feed Inlet |
DN150 |
DN150 |
DN150 |
DN150 |
|
Nozzle Dia. |
50mm |
42mm |
35mm |
35mm |
|
Hopper Size |
600 X600m |
600 X600mm |
600 X600mm |
600 X600mm |
|
Burden Speed |
≤100kg /min |
≤80kg /min |
≤60kg /min |
≤60kg /min |
|
Mud Density |
≤2.8g/cm³ |
≤2.4g/cm³ |
≤2.0g/cm³ |
≤2.0g/cm³ |
|
Mud Viscosity |
≤120s |
≤120s |
≤80s |
≤80s |
|
Dimension |
2200×1700×1200 |
2200×1700×1200 |
2000×1650×1100 |
2000×1650×1100 |
|
Weight |
1680kg |
1400kg |
1280kg |
1100kg |
6 inch high shear low pressure mud hopper
Complete with 2 in(also 1.5 inch special lower volume nozzle, venturi hopper, funnel, sack table, 6 inch butterfly, valve all mounted on a base. This hopper with 2 inch nozzle handles 800-900 pounds of barite per minute. Three(3) inch male NPT inlet and 6 inch weld neck outlet. (Other end types are available). Unit primed with carbozinc and painted with finish coat.
4 inch high shear low pressure mud hopper
Complete with 1.5 inch nozzle, venturi hopper, funnel, sack table, 4 inch butterfly, valve all mounted on a base. The hop-per with 1.5 inch nozzle handles 5-600 pounds of barite per minute. Two (2) inch male NPT inlet and 4 inch weld neck outlet. (Other end types are available). Unit primed with carbozinc and painted with finish coat.
| Model | Work Press | Inlet Size | Hopper Diameter | Weight |
| TRSL150-50 | 0.2～0.4mPa | DN150 | 600×600mm | 170kg |
| TRSL150-40 | 0.2～0.4mPa | DN150 | 600×600mm | 170kg |
| TRSL150-30 | 0.2～0.4mPa | DN150 | 600×600mm | 165kg |
| TRSL100 | 0.2～0.4mPa | DN100 | 500×500mm | 140kg |
Jet mud mixer for drilling fluids solids control
Drilling Mud Mixing Hopper in the mud system is used to mix mud. In the oil and gas drilling plays a very important role. The centrifugal sand pump in horizontal directional crossing and role in the process of slurry shield also no less.
TR solid control is an exporter of Drilling Mud Mixing Hopper. We are an exporter of drilling fluids venturi hopper. TR solids control is the designed,selling,production,service and delivery of Chinese based manufacturer. We will provide the high quality mud hopper and best service. Your best jet mud mixer hopper start from TR solids control.
