How to improve the life of the Hyperpool PWP Replacement Shaker Screen?
Appropriate screen tension. Insufficient screen tension will cause the screen to vibrate. This is usually a fracture or damage along the edge of the screen or at the hemming bead. In general, in this case, as long as the screen is installed flat, the screen should not be mechanically damaged during use. The vibrating screen can prolong the service life and reduce the excessive damage of the vibrating screen.
High quality screen. The screen generally has the upper screen layer and the lower force layer, and the two layers are required to be closely fitted. If the pre-tensioning process of the screen is poor, when the force layer at the bottom of the screen is tight, the screen layer will be closed. If there is no tension, the throwing force of the drill cuttings will be greatly reduced during operation, resulting in the screen being unable to discharge the drill cuttings.
Make sure the vibration motor is turned correctly. The rotation direction of the motor will affect the forward movement of the drill cuttings, which will be much slower, stay on the screen for a long time, and even cause the drill cuttings to fail to discharge.
We are an exporter of Hyperpool PWP Screen. TR is a Hyperpool Screen manufacturer and China flat shaker screen supplier. TR solids control is the designed, selling, production, service and delivery of Chinese drilling fluid shakers manufacturers. We will provide the high qua